Adjusting The Operator's Seat (Kx015-4/Kx016-4); Horizontal Seat Adjustment (Seat Stand-Off); Spring Adjustment (Operator's Weight); Backrest Adjustment - Kubota KX015-4 Operating Instructions Manual

Adjusting the operator's seat (KX015-4/KX016-4)

Adjust the operator's seat so that fatigue-free and comfortable working is possible. It should be pos-
sible to operate all controls safely.

Horizontal seat adjustment (seat stand-off)

Pull the horizontal seat adjustment lever (4) up and move the
!
seat to the desired position by moving it forward or back, then
release the lever.
Check that the seat is locked into place.
STOP

Spring adjustment (operator's weight)

The seat can be set to the weight of the operator using the toggle (figure above, position/2). Refer to the
!
weight indicator (figure above, position/1) when choosing your setting.
Depressing the lever increases spring tension (heavier operator), and pulling up the lever reduces spring ten-
!
sion (lighter operator).
Adjust the seat so that a comfortable cushioning is achieved.
!

Backrest adjustment

Take the load off the backrest and pull up the backrest adjustment lever (figure above, position/3). Set the
!
backrest to the desired sitting position and release the lever. The backrest should be adjusted so that the op-
erator can safely operate the control levers with the back resting completely on the backrest.

Adjusting the operator's seat (KX018-4/KX019-4)

Adjust the operator's seat so that fatigue-free and comfortable working is possible. It should be pos-
sible to operate all controls safely.

Horizontal seat adjustment (seat stand-off)

Pull the horizontal seat adjustment lever (4) up and move the
!
seat to the desired position by moving it forward or back, then
release the lever.
Check that the seat is locked into place.
STOP
66
Operation