Safety Labels On The Excavator - Kubota KX015-4 Operating Instructions Manual

Safety labels on the excavator

Keep the safety and warning symbols (labels) on the excavator clean and legible, replacing them if necessary.
The positioning of the safety symbols is illustrated in the following figures.
1) Code #: RG158-5726-0
Danger of cutting from rotating components!
The rotary fan can cut the fingers or sever them.
Do not reach into rotating components.
!
2) Code #: RG158-5721-0
Risk of burns from hot components!
Surfaces can be hot and lead to burns.
Do not touch hot parts, such as exhaust muffler, etc.
!
3) Code #: RG158-5723-0
Mortal danger from moving excavator!
When staying in the danger zone and in the case of a suddenly starting
excavator, there is the danger of being run over by the excavator.
Only start the machine from the driver's seat.
!
Do not start the machine by joining the starter poles.
!
4) Code #: RG158-5727-0
Mortal danger by squashing!
Low safety distance to the excavator and to obstacles can prevent
flight from the danger zone. Squashing by excavator results in severe
injury or death.
Do not enter the manoeuvring area.
!
Ensure safety distance to obstacles and sufficient freedom of mo-
!
vement.
5) Code #: R2491-5736-0
Fire hazard from inflammable diesel fuel!
Inflammatory vapours can occur in the fuel tank, which may go up in
flames as a result of an ignition source.
Do not use open flames in the area of the fuel tank.
!
18
Safety rules