Kubota KX015-4 Operating Instructions Manual page 113

4. Pull out the red key.
5. The indicator Insert key blinks.
6. Insert black key into the starter switch.
Do not turn the key at this point. If the key is in the RUN
position, turn it back to the STOP position.
7. After a short moment, the indicator Pull out key blinks. This
points out the fact that the black key has been registered for
this vehicle.
8. Turn key into position RUN to complete the registration process.
9. One after the other, insert all registered black keys into the starter switch and check whether the engine can
be started using these keys.
If a registered black key is lost, the other black keys must be re-registered. This procedure locks the
lost or stolen black key, which can no longer be used to start the engine.
112
Operation