Kubota KX015-4 Operating Instructions Manual page 89

When the selected flow rate is shown on the display, you can use
the display selector switch (1) and the menu button (2) to increase
or decrease the flow rate.
Press the menu button (2) to decrease the flow rate.
!
Press the display selector switch (1) to increase the flow rate.
!
The flow rate can be increased or decreased in 14 steps.
! At the highest step, the flow rate reaches its maximum level.
! If the flow rate is at the lowest level, flow is blocked and
there is no oil flow.
Press and hold the display selector switch (1) until the flow rate
!
setting changes to left AUX port.
You can switch continuously between the left and right
AUX port flow rate settings.
After setting the flow rate for the operating mode selected, you can either switch to the next operating mode or exit
the settings screen.
To change the operating mode:
To toggle between the operating modes, press and hold the
!
menu button (2).
Press the display selector switch (1) to select the next operat-
!
ing mode.
Set the flow rate for the next operating mode selected.
!
To finish the flow rate setting:
To toggle between the operating modes, press and hold the
!
menu button (2).
Press and hold the display selector switch (1) to finish the flow
!
rate setting.
Press the menu button (2) again to return to the normal display
!
screen.
88
Operation
1
2
1
1
2