Operating Modes - Kubota KX015-4 Operating Instructions Manual

Operating modes

The auxiliary port connector is preset at the factory, enabling four operating modes to be selected. Up to six op-
erating modes can be preset.
Whenever the auxiliary port button is pressed the service mode changes by one level.
When the starter switch is turned to the RUN position the most-recently used setting is activated.
Select the mode of operation
Indica-
tor Auxil-
iary port
If the auxiliary port is switched on and a mode of operation has been
selected, the set flow rate in the right auxiliary port connector and
then in the left auxiliary port connector is indicated for few seconds
in the display (2) by pressing the display selector switch (1).
86
Mode 0
Indicator off
Auxiliary port enable
Auxiliary port not active
Mode 1 Mode 2
Indicator shines Indicator blinks
Max. flow rate One way flow
2
Operation
Mode 3
Indicator blinks
Limited flow volume
1