Draining The Hydraulic Oil; Filling The Hydraulic Oil - Kubota KX015-4 Operating Instructions Manual

Draining the hydraulic oil

Place a container with a minimum capacity of 70 litres under
!
the hydraulic oil drain plug.
Remove the drain plug (1) and drain the hydraulic oil.
!
Install the drain plug with a new sealing ring.
!

Filling the hydraulic oil

Filling quantity with oil change:
Total hydraulic system capacity:
Remove the filler plug (1) from the hydraulic oil tank.
!
Insert a clean funnel with a strainer into the filler plug opening.
!
Fill hydraulic oil to half way up the sight glass (1).
!
Refit the plug of the hydraulic oil tank.
!
Start the engine (page 68) and operate all control functions.
!
Lower the front attachments and the dozer onto the ground
!
(page 133).
Stop the engine.
!
Check the hydraulic oil level, add oil if necessary.
!
Replace the bottom plate (1).
!
134
approx. 14,2 L
27 L
Maintenance