LifeFitness CLUB Series Assembly Instructions Manual page 5

2
19
28
FIGURE 2
STEP 2:
• LOOSELY assemble the TOP CROSS SUPPORT (4) to the TOWER (1) and the PIVOT ARM SUPPORT (2) using eight RH CAPS
(28), four 3/8 X 2-3/4" BOLTS (15), eight 3/8" SAE WASHERS (21), eight 3/8" RH WASHERS (22) and four 3/8" LOW HEIGHT
LOCK NUTS (19) as shown in FIGURE 2. (NOTE HOLE LOCATION BEFORE ASSEMBLY)
• LOOSELY assemble the 48" TUBE (10) to the TOWER (1) and the PIVOT ARM SUPPORT (2) using eight RH CAPS (28), four 3/
8 X 2-3/4" BOLTS (15), eight 3/8" SAE WASHERS (21), eight 3/8" RH WASHERS (22) and four 3/8" LOW HEIGHT LOCK
NUTS (19) as shown in FIGURE 2.
10
15 3/8 X 2-3/4"
3/8 X 2-3/4" 15
21
22
1
4
5
1A