Cleaning The Stainless Steel Trough - Miele ProLine CS 1018 G Operating And Installation Instructions

Allow the ProLine element to cool
down before cleaning.
 Clean the ProLine element and
accessories after each use.
 Dry the ProLine element thoroughly
after cleaning it with water to avoid
limescale residue.
Cleaning and care
Cleaning the stainless steel
trough

Risk of damage by pointed
objects.
The seal between the hob and the
worktop could suffer damage.
Do not use pointed objects for
cleaning.

Damage caused by soiling.
Soiling, particularly salty food or
liquid and olive oil, can cause
damage if left on the printed surfaces
for a long time.
Remove such soiling immediately.

Damage caused by incorrect
cleaning.
Stainless steel cleaning agents rub
off the printed symbols.
Do not use stainless steel cleaning
agents on printed symbols.
 Clean stainless steel surfaces using a
solution of warm water and a little
washing-up liquid applied with a soft
sponge. Soften any stubborn soiling
beforehand. If necessary, the rough
side of a non-scouring sponge can
be used.
 Finally, dry with a clean soft cloth.
29