Operation; Switching On - Miele ProLine CS 1018 G Operating And Installation Instructions


Risk of fire with overheated food.
Unattended food can overheat and
catch alight.
Do not leave the hob unattended
whilst it is being used.

Switching on

 Push in the control knob and turn it
anti-clockwise to the ignition
symbol . The ignitor will „click" and
ignite the gas.
 When a flame is visible, keep the
control knob pressed in for
5-10 seconds, and then let it go. Do
not keep the knob pressed longer
than 15 seconds.
 If the burner does not ignite after
15 seconds, turn the control knob
back to „". Air the room or wait at
least one minute before trying again.
 If the burner does not ignite the
second time, turn the control knob
back to „" and see „Problem solving
guide".
Flame goes out during operation
 If the flame goes out, for example
because food has boiled over or if
there has been a sudden draught,
turn the control knob to „".
 Wait at least one minute before trying
ignite the burner again.
Switching on during a power outage
If there is an interruption to the
electricity supply, the gas can be
ignited manually, e.g. with a match.
 Press in the relevant control and turn
it anti-clockwise to the large flame
symbol.
 Hold the control pressed in and light
the gas at the burner with a match.
 Keep the control pressed in for a
further 5-10 seconds and then
release it.

Operation

25