Securing the spring clamps and
spacer bars – granite and marble
worktops
You will need heavy-duty double-sided
tape (not supplied) to secure the spring
clamps or spacer bars.
a
a
Attach the adhesive tape along the
top edge of the cut-out in the
positions shown in the hob
illustration.
Position the spring clamps or
spacer bars on the top edge of the
cut-out and press them firmly into
place.
b
c
Apply silicone to the side and lower
edges of the spring clamps or
spacer bars .
Then fill the gap between the
spacer bars and the worktop with
silicone.
Installation
a
b
47