Converting To Another Gas Type; Jet Table; Changing The Jets - Miele ProLine CS 1018 G Operating And Installation Instructions


Risk of explosion due to an
incorrect conversion.
If the conversion to another type of
gas is carried out incorrectly, it may
result in gas leakage.
Conversion from one type of gas to
another must only be undertaken by
an approved and registered gas
installer in strict accordance with
current local and national safety and
building regulations. The installer is
responsible for ensuring that the
appliance functions correctly when
installed.

Jet table

The jet markings refer to a ¹/₁₀₀ mm
bore diameter.
Main jet
Natural gas
Liquefied
Petroleum
gas
Town gas

Simmer
adjustment
jet
1.6/ 0.7/
0.58 (R) 0.38
1.05/ 0.6/
0.34 (E) 0.23
3.8 0.9
1.0 (II) 0.54

Converting to another gas type

Changing the jets

 Disconnect the hob from the
electricity supply and turn off the gas
supply.
When converting to another type of
gas, both the main and small jets
need to be changed.
The external gas governor delivered
with the appliance should not be
installed when using Liquid gas or
Natural gas.
Removing the upper part of the
appliance
You must remove the top of the
appliance to change the jets.
 Pull the rotary controls up and off to
remove them.
 Remove the loose burner
components.
 Loosen the fixing screws on the
burners.
 Lift the upper part of the appliance off
to remove it.
55