Table of Contents
Advertisement
Fire hazard due to overheated
food.
Unattended food can overheat and
ignite.
Do not leave the wok unattended
while it is being used.
Rapid ignition system
The wok is supplied with a rapid ignition
system with the following features:
- Rapid ignition without the need to
hold the knob.
- Automatic re-ignition
If the flame is extinguished by a draft,
for example, the burner is automati-
cally relit. If re-ignition is unsuccess-
ful, the gas supply is automatically
cut off (see "Safety features" – "Igni-
tion safety").
If there has been a power outage, the
automatic re-ignition feature will not
work properly.
Turning the appliance on
Press the knob lightly and turn it
counterclockwise to the large flame
symbol.
Then press it down firmly to open the
gas supply.
The ignitor "clicks" and ignites the gas.
If the burner does not ignite, turn the
knob to the position. Ventilate the
room or wait for at least 1 minute be-
fore trying again.
If the burner does not ignite the sec-
ond time, turn the knob back to the
position and see "Frequently asked
questions".
Brief re-ignition may occur during
switch-on (1–2 x clicks), e.g., if there is
a draft.
Switching on during a power outage
In case of a power outage, the flame
can be ignited manually.
Press in the relevant control knob and
turn it counterclockwise to the large
flame symbol.
Hold the control knob pressed down
and light the gas at the burner with a
match.
Keep the control knob pressed down
for an additional 5–10 seconds and
then release it.
Operation
25
Advertisement
Table of Contents
