BlueHelix HiTech RRT C
PCB replacement
•
Disconnect the power supply and close the gas cock ahead of the valve.
•
Undo the two screws "1" and rotate the control panel.
•
Raise the electrical box cover by operating on the tabs "2"
•
Undo the screws "3". Raise the board by operating on the side tabs "4".
•
Remove all the electrical connectors.
•
Insert the new board and reconnect the electrical connections.
EN
1
fig. 54
2
3
3
fig. 55
cod. 3541V691 - Rev. 00 - 04/2022
1
2
4
43