Ferroli BlueHelix HiTech RRT C Instructions For Use, Installation & Maintenance page 38

To open the boiler casing:
1. Undo the screws "1" (see fig. 44).
2. Pull the panel outwards and lift it.
B
On this unit, the casing also acts as a sealed chamber. After any operation
involving opening the boiler, carefully check the correct refitting of the front
panel and its seal.
Proceed in reverse order to refit the front panel. Make sure it is correctly hooked to the upper fastenings and is correctly
positioned at the sides. Once the screw "1" is tightened, the head must not be below the lower reference fold (see
fig. 45).
1
OK
38
BlueHelix HiTech RRT C
1
1
fig. 44- Front panel opening
1
fig. 45- Correct position of front panel
cod. 3541V691 - Rev. 00 - 04/2022
3
2
NO
EN