Accessories; Hydraulic Kit; Fittings Cover Kit - Ferroli OMNIA S HYBRID H 3.2 Installation, Use & Maintenance Manual

Indoor wall unit for split reversible hybrid heat pumps which can be combined with an outdoor dhw heater

Table of Contents

2.4 Accessories

2.4.1 Hydraulic kit

The hydraulic kit is available on request (code 012050W0 consisting of a gas tap, water inlet tap, pipes and fittings) for the hydraulic connection of the wall-mounted

indoor unit.

fig. 3 - Hydraulic kit

Hydraulic kit accessory

These two valves are not part of the kit since they are part of the standard supply with the indoor unit.

2.4.2 Fittings cover kit

The fittings cover kit is available on request (code 016009X0) to add an aesthetic cover of the wall hydraulic connections. The kit consists of a galvanised metal panel

in the same colour as the unit, to be fastened with 4 screws under the indoor unit

fig. 5 - Fittings cover kit

Fittings cover kit accessory

Cod. 3542B230 - Rev. 00 - 02/2022

OMNIA S HYBRID H 3.2

°C

fig. 4 - Assembled hydraulic kit

°C

fig. 6 - Fittings cover kit assembled

Table of Contents