Vertical Steam; Self-Cleaning; When You Finished Ironing; Care And Cleaning - Fakir SPRING Manual

Vertical Steam

Ensure that there is enough water in the water tank. Place the steam iron on its heel
rest and plug it. Set the temperature control dial and variable steam control to their
maximum positions. Hold the iron vertically and press the steam burst button.
The steam iron can be used on the dry setting with or without water in the water tank, it
is best to avoid having the water tank full while dry ironing. Turn the variable steam
control to the minimum position. Select the setting on the temperature control dial best
suited for the fabric to be ironed.
CAUTION!
If the steam iron has been used for a long time, it is hot
and there is no water. Do not refill it with water until the
steam iron cools down.

Self-cleaning

Fill the half of the water reservoir. Set the temperature control to its maximum position.
Insert the main plug into the wall socket. Allow the iron to heat up until the indicator
light goes out. Unplug the steam iron. Holding the iron horizontally over the sink,
change the steam control to the maximum position. Boiling water and steam will be
ejected from the holes in soleplate with impurities washed out. Move the iron over an
old (preferably) piece of cloth. This ensures that the soleplate will be dry during storage.

When You Finished Ironing

Set the temperature dial to the minimum position. Remove the main plug from the wall
socket. Stand the iron on heel rest.

Care And Cleaning

Before cleaning the steam iron ensure it is unplugged from the power supply and has
completely cooled down. Do not use abrasive cleaners.
SPRING
21
EN