Ricoh Lily Service Manual page 378

10 May 1996
1.1.3 To change the value of the γ correction data
1. Enter the SP mode and touch No. 4 SP Special Feature.
2. Go to page 2 (letter mode) or page 3 (photo mode) and change the
OFFSET values. (Refer to the tables on the next page.)
NOTE: Always adjust the color balance using the "OFFSET" keys only.
Do not change the values in the "STEP" column.
3. To finish the operation, touch the Index [B] key to return to the SP mode
menu. Touch the Exit key to exit the SP mode.
•
To back up the current settings, refer to the information in chapter 4,
"Service Tables".
COLOR BALANCE ADJUSTMENT
5-5