10 May 1996
36. Locate the switch actuator [A] inside
the right door and actuate the front
safety switch.
37. Plug in the power cord and turn on the main switch.
38. Enter SP mode as follows.
1) Press the clear modes key.
2) Wait for 2 or 3 seconds while the display returns to the initial screen.
3) Enter "107" with the number keys.
4) Hold down the clear/stop key for more than 3 seconds.
39. Touch the SP Test Mode key [B].
NOTE: Make sure to use the editor pen when touching the touch panel
display.
[B]
40. Touch the Next key [C] to open page 4.
NOTE: Wait until the development unit drive stops, then start step 41.
3-17
COPIER (A172/A199)
[A]
A172I529.img
[C]