Table of Contents
Advertisement
10 May 1996
9.2.2 For Photo Mode
In the "=Contone=" screen (page 2), adjust the color scales by changing the
γ data in the OFFSET columns for each color.
Low:
Use to adjust levels 1 to 2 of the 11-step color scale in the middle
of the Test Page.
Middle: Use to adjust levels 2 to 10.
High:
Use to adjust levels 10 to 11.
ID MAX: Use to adjust the whole range, including level 11.
Do not change this unless the whole range needs to be made
brighter or darker. The adjustment is very sensitive, so it is best
not to change the default settings.
Do not change the γ data in the STEP column from the default settings.
3. To finish the operation, touch the Index [A] key to return to the SP mode
menu. Touch the Exit key to exit the SP mode.
A172/A199 Fiery XJ System Printer γ Adjustment Procedure
5-33
[A]
Advertisement
Table of Contents
