Table of Contents
Advertisement
10 May 1996
NOTE 2: Transfer Belt Unit
The following parts should be lubricated with silicone grease G40M every
40K scans:
•
Transfer belt release cams [A]
•
Belt bias roller shaft [B] (only at the end)
NOTE 3: Transfer Roller Unit
[C]
The end of the transfer roller shaft [C] should be lubricated with silicone
grease G40M every 40 K scans.
PREVENTIVE MAINTENANCE SCHEDULE
[B]
A172M501.img
A172M502.img
4-75
[A]
[A]
Advertisement
Table of Contents
