Table of Contents
Advertisement
10 May 1996
2.2 COPIER SEPARATION
[A]
The machine can be separated into two units (the main frame and the paper
supply unit). Separation of the machine will help the transportation to the
customer's site.
1. Open the front door and remove the front securing brackets [A] (4 screws
each).
2. Remove both upper and lower rear covers (4 screws each).
3. Remove the rear securing brackets [B] (4 screws each).
4. Disconnect the connectors running between both units, and free them
from the harness clamps.
5. Lift up the machine by using the handles.
NOTE: a) When lifting the machine, lift straight up.
b) Positioning pins [C] are located at the rear. When attaching, make
sure to clear the harnesses out of the way.
[C]
A172I509.img
[B]
3-5
COPIER (A172/A199)
[C]
A172I510.img
Advertisement
Table of Contents
