V6.0_2021-05-25
2
Safety Instructions
NOTE
xxx
CAUTION!
xxx
WARNING!
xxx
Settings and calibrations not described in these operating instructions must be carried out based on
the technical description of the device by PROTEC customer service or a service authorized by it.
NOTE
All instructions supplied with the automated X-ray film processor must be observed
and any safety instructions contained therein must be carefully read and adhered to.
NOTE
After the initial installation, the commissioning must be logged with "Default
function test".
NOTE
The X-ray film processors may only be commissioned if all safety measures for
operator protection have been met and checked. These protective measures can
include door contact, designated area, dosimeter, protective clothing, etc.
CAUTION!
The instructions for use contain all the information relevant to safety in order
to generally put the X-ray film processor into operation. The device may only
be operated by appropriately trained and trained personnel. In this context,
operation is ensured by clear symbols on the control elements. All further
information and instructions can be found on the supplied data carrier (USB,
CD or DVD). This information applies in its entirety as an appendix to these
instructions for use and must be observed.
NOTE
All control elements are described again in detail in these instructions for use.
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
COMPACT 2 Instructions for use
Contains information that are relevant to the usage.
Contains information that can cause damage to properties at non-
conformity.
Contains information that can cause personal injuries at non-
conformity.
5190-0-0002
12 of 35
Need help?
Do you have a question about the COMPACT 2 and is the answer not in the manual?