Device Description; Introduction; Description; Versions - Protec COMPACT 2 Instructions For Use Manual

V6.0_2021-05-25
1

Device Description

1.1

Introduction

These instructions for use describe the performance characteristics and operation required for efficient
and effective handling of the automated X-ray film processor.
Before working with the automated X-ray film processor, the complete operating instructions must be
read, in particular the safety instructions and the chapter Handling.
NOTE
The instructions for use are fully valid for all model variants of the automated X-ray
film processor described.
1.2

Description

The automated X-ray film processor is a laboratory device used for automatic development of X-ray
films in human medicine.
The device is equipped with a precise roller transport system that can process sheet films.
Automatic film acquisition starts as soon as a film is fed into the feeder.
The film materials are developed, fixed, watered and dried.
With the easy-to-use microprocessor control, processing conditions can be adjusted to suit a wide
variety of films and chemicals.
The developer and fixing solutions are temperature controlled, circulated and automatically
replenished.
This instructions for use provide important information on the installation, operation and maintenance
of the unit. Please follow the instructions given carefully to ensure reliable operation of your automated
X-ray film processor.
1.2.1

Versions

COMPACT 2, 220-240V, 50 Hz
COMPACT 2, 220-240V, 60 Hz
COMPACT 2 Mammo, 220-240V, 50 Hz
COMPACT 2 Mammo, 220-240V, 60 Hz
Optional accessories
The following optional accessories are available for the automated X-ray film processor:
•
Open working table COMPACT 2 1190-0-0010
•
Close base cabinet 1190-0-0011

1.2.2 Installation

NOTE
The installation of the automated X-ray film processor must be performed by
PROTEC Customer Service or a service authorized by it.
The automated X-ray film processor is intended for operation in a darkroom or in premises specially
darkened for this purpose.
For detailed information, please refer to the installation instructions of the automated X-ray film
processor.
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
COMPACT 2 Instructions for use 5190-0-0002
9 of 35