Table of Contents
Advertisement
Quick Links
PROGNOST C
Diagnostic X-ray system mechanics
Model/ID: 7073-9-000X
Basis-UDI-DI: 426050264X013ZJ
Instructions for use
Ident. No. 5073-0-0002
Version: 5.0
PROTEC GmbH & Co. KG
Issued: 2021-11-24
In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
Subject to alterations
Telephone: +49 (0) 7062/92 55-0 E-Mail: protec@protec-med.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Protec 7073-9-000 Series
Summary of Contents for Protec 7073-9-000 Series
- Page 1 Diagnostic X-ray system mechanics Model/ID: 7073-9-000X Basis-UDI-DI: 426050264X013ZJ Instructions for use Ident. No. 5073-0-0002 Version: 5.0 PROTEC GmbH & Co. KG Issued: 2021-11-24 In den Dorfwiesen 14, 71720 Oberstenfeld, Germany Subject to alterations Telephone: +49 (0) 7062/92 55-0 E-Mail: protec@protec-med.com...
- Page 2 All sheets of this document contain proprietary and confidential information of PROTEC GmbH & Co. KG and is intended for exclusive use by current PROTEC GmbH & Co. KG customers. Copying, disclosure to other or other use is prohibited without the express written authorization of PROTEC´s law department.
-
Page 3: Table Of Contents
Adjustment of the focus-film distance (SID) ....................16 4.2.3.5 Adjusting the light-/beam field.......................... 16 4.2.3.6 Exposure preparation / Exposure releasing ....................17 4.2.3.7 Exposure with cassette on the table top ...................... 17 PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 3 von 31... - Page 4 Description of symbols, labels and abbreviations ............29 Symbols ....................................... 29 Type label ......................................30 Labels ........................................30 Position of the signs and labels ............................31 Abbreviations ....................................31 PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 4 von 31...
-
Page 5: Revision Status
8, 10, 15-19, 21, 2021-11-24 chap. 4 Handling revised, chap. 5 26-32 safety maintenance revised, chap. 7 technical data revised, chap. 8 description of symbols & labels revised PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 5 von 31... -
Page 6: General Notes
PROTEC GmbH & Co. KG. Assembly personnel and other persons who are not employees of the technical service department of PROTEC GmbH & Co. KG are requested to contact the local branch of PROTEC GmbH & Co. KG before assembly or service work is started. -
Page 7: Product Description
Hardware and Network System Requirements As a stand-alone product, the PROGNOST C has no hardware or network connection and therefore no hardware or network requirements. PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 7 von 31... -
Page 8: Installation
1.2.3 Installation NOTE The installation of the PROGNOST C must be performed by PROTEC service department or a service company authorized by them. For more information, please see separate Installation manual of the PROGNOST C. Contact information of persons qualified to perform installations are available upon request at: PROTEC GmbH &... -
Page 9: Vertical Bucky Wall Stand
Appropriate users can be, for example: X-ray technicians, X-ray assistants, medical technical X-ray assistants, surgeons, casualty surgeons, orthopaedists and other trained medical personnel. PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 9 von 31... -
Page 10: 1.10 Declaration Of Conformity
In den Dorfwiesen 14 | 71720 Oberstenfeld Germany Phone: (+ 49) 7062 – 92 55 0 Fax: (+ 49) 7062 – 92 55 60 E-Mail: protec@protec-med.com Internet: www.protec-med.com PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 10 von 31... -
Page 11: Safety Instructions
Settings and calibrations that are not described in these instructions for use must be carried out using the technical description of the device by PROTEC service department or a service company authorized by them. -
Page 12: General Safety Instructions
X-ray system, the connected X-ray generator or the Power Box must be switched off. 2.1.2 Device Operation In case of a malfunction, do not use the PROGNOST C anymore and notify PROTEC service department or a service company authorized by them. 2.1.2.1 Operating Type The PROGNOST C is not intended for continuous operation. -
Page 13: Explosion Protection
The PROGNOST C is intended for use in an environment in professional health care facilities (e.g., clinics, surgery centres, physiology practices ...). PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 13 von 31... -
Page 14: Control Elements And Displays
Brake for the tube head rotation around the carrying axis Free movement (sensor beneath the tube head) Permits the horizontal movement of the tube column and vertical movement of the tube head PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 14 von 31... -
Page 15: Patient Positioning Table
Vertical Bucky Wall Stand Brake for the vertical movement of the wall stand Bucky. Up/down release button PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 15 von 31... -
Page 16: Handling
Use the adjusting knobs to set the collimator shutters to the size of the cassette being used. The setting is made on the scale for the corresponding focus-film distance (SID). This limits the light- /beam field to the cassette size used. PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 16 von 31... -
Page 17: Exposure Preparation / Exposure Releasing
The PRS 500 C is switched on via the control panel of the generator. All system components are supplied with voltage via the generator. If a power box is included in the system, the power is supplied via the power box. PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 17 von 31... - Page 18 After successful completion of the self-test, the parameters are displayed NOTE The mechanics for basic diagnostic X-ray systems PROGNOST C must be switched PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 18 von 31...
-
Page 19: Safety And Maintenance
(e.g., torn cable, bent parts) or if the resulting image quality (e.g., artifacts in the image) is insufficient. In this case, please contact PROTEC service department or a service company authorized by them immediately. -
Page 20: Inspection And Maintenance
Technical Description in chapter 3 Maintenance and Safety Inspection. In the event that the planned maintenance is not carried out, PROTEC GmbH & Co. KG assumes no liability for damage to the user or third parties, if damage results from inadequate or not carried out maintenance. -
Page 21: Warranty
The PROGNOST C is designed for a service life of 7 years when used in accordance with the specifications and regular maintenance by PROTEC service department or a service company authorized by them. After the product has reached the end of its service life, further use is at your own risk. -
Page 22: Electrical Data
The device is suitable for use in facilities other than Class A residential areas and those that are directly connected CISPR 11 to the public supply network, which also supplies Harmonic emissions Class A PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 22 von 31... - Page 23 150 kHz bis 80 EN 61000-4-6 3 V/m See table below Radiated RF 1kHz 80% AM disturbances 3 V/m EN 61000-4-3 80 MHz to 2.7 GHz PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 23 von 31...
- Page 24 2450 2400 – 2570 b/g/n, 217 Hz RFID 2450, LTE Band 7 5240 Pulse modulation: 5500 5100 - 5800 WLAN, 802.11 a/n 217 Hz 5785 PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 24 von 31...
-
Page 25: Technical Data
V5.0_2021-11-24 PROGNOST C Instructions for use 5073-0-0002 Technical Data Dimensions Room plan version 1 (operation of the system): PATIENT PATIENT PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 25 von 31... - Page 26 To mount or remove the table top, the room must either have a size of at least 6000mm or it is necessary to move components to have more space available. PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 26 von 31...
-
Page 27: Patient Positioning Table
± 135° Tube stand longitudinal travel: 1300 mm Vertical X-ray system image receptor stand Column height: 1850 mm Vertical shift film centre: 400mm - 1735mm PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 27 von 31... -
Page 28: Attenuation Equivalent
Environmental conditions for shipping and storage Ambient Temperature - 10°C to + 70°C Relative humidity 10% to 95% (non-condensing) Atmospheric pressure 500 hPa to 1060hPa PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 28 von 31... -
Page 29: Description Of Symbols, Labels And Abbreviations
Caution: pinch-/crushing hazard for hands and fingers Do not exceed the maximum indicated weight Do not exceed the maximum indicated weight Manufacturer Medical Device Order reference Serial number Unique Device Identification PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 29 von 31... -
Page 30: Type Label
Label on the table top and tube support, floor stand: Caution: Watch out for possible crushing hazards to fingers or hands while moving the table top, table or X-ray unit. PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 30 von 31... -
Page 31: Position Of The Signs And Labels
Position of the signs and labels Type label Abbreviations Millimetre Centimetre Pound Kilogram °C Degree -Celsius Hectopascal German Industry Standard European Standard CE-Mark Hertz Duty cycle Ampere Serial number PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 31 von 31...
Need help?
Do you have a question about the 7073-9-000 Series and is the answer not in the manual?
Questions and answers