View Data; Clear Reading Memory - Thermo Scientific G100 Series Operating Manual

View Data

The 'View Data' option enables the operator to view the stored readings.
1. From the 'Main Read Screen' press the 'Menu' key on the instrument panel.
2. Press 'Key 4' to view stored data readings and the following screens are displayed:
Press 'Key 8 - Scroll Down'
3. Press 'Key 4 - Scroll Left' and 'Key 6 - Scroll Right' to move through the stored readings either
forwards or backwards. Press 'Key 2 - Scroll Up' and 'Key 8 - Scroll Down' to switch between the
first (CO
4. Press the soft-key 'More' to refine or filter the readings to view.
1-Delete All
2-Filter
3-Go to

Clear Reading Memory

The 'Clear Reading Memory' function enables the user to check how many readings have previously
been taken and clear them if necessary.
The instrument can store up to 1000 readings. The reading structure is fixed and may contain optional
parameters not activated for your particular instrument configuration, i.e. oxygen, temperature and
humidity.
Thermo Scientific
View Data – Screen 1
& Baro) and second (T1, T2 & humidity) group of reading parameters.
2
View Data – Soft-key 'More'
- Enables the operator to delete all the readings stored, (see below).
- Used to refine/filter the range of readings displayed by ID or date ranges.
Press between two dates, after a date, before a date or all dates.
- Enables the operator to jump to the first or last reading in the memory or any
other reading.
Note Before readings are actually deleted a caution message is displayed; once readings
have been deleted they cannot be recovered.
General Operational Instructions
Main Menu
G100 Range CO Analyser
2
5-9