Table of Contents
Advertisement
Chapter | Safety
3
Safety
3.1 General Safety Guidelines
•
Before using your sample holder, read its instruction manual completely and understand it.
Please take notice of all warnings, cautions and notes to ensure the correct and safe
functioning of the instrument.
•
Never place the sample holder near an open flame or in an excessively hot environment.
It must not be installed in an ATEX explosive hazard area.
•
Never place the sample holder in locations where excessive moisture or corrosive
materials are present.
•
The sample holder construction provides protection against the risk of electrical shock by
grounding the appropriate metal parts. The protection may not work properly unless the
ARL EQUINOX power cord is connected to a properly grounded socket. It is customer's
responsibility to assure that a proper ground connection is provided.
•
Never use flammable or corrosive fluids with this unit.
•
If the sample holder is used in a manner not specified by the Thermo Fisher Scientific,
the protection provided by the sample holder may be impaired.
•
Only accessories that comply with Thermo Fisher Scientific specifications are allowed to
be used with ARL EQUINOX X-Ray diffractometers.
•
Transport of the sample holder should be done with extreme care.
•
Never operate a damaged sample holder.
•
Never operate the sample holder with a damaged power cord.
Confidential, limited rights
PN AA83858 | Revision A | 13-Jun-2019
Instruction Notice, Sample Holder SSRZ
Page 6
Advertisement
Table of Contents
