Chapter | Installation
5
Installation
5.1 Install SSRZ Sample Holder in the ARL EQUINOX
Insert the sample holder in the sample holder mounting hole of the instrument, do not use any
unnecessary force. The sample holder and the mounting hole (Ø 30 mm) are designed to
avoid any mechanical clearance resulting in irreproducible results. The pin of the sample
holder has to be inserted in the reference hole.
For more detailed information refer to the ARL EQUINOX instruction notice.
5.2 Connect the Sample Holder to the Power Supply
The power supply plug for the spinning sample holder is located below the sample area.
Refer to the ARL EQUINOX reference manual for more details.
Confidential, limited rights
PN AA83858 | Revision A | 13-Jun-2019
Instruction Notice, Sample Holder SSRZ
Page 10