Daikin R32 Split Series Installer's Reference Manual page 86

10 | Configuration
Auto restart
Power saving function
Disable protections
Installer reference guide
86
The outdoor temperature is averaged over the selected time period.
# Code
[9.B.3] [1-0A]
Auto restart
When power returns after a power supply failure, the auto restart function
reapplies the user interface settings at the time of the power failure. Therefore, it
is recommended to always enable the function.
# Code
[9.E] [3-00]
Defines whether the outdoor unit power supply can be interrupted (internally by
indoor unit control) during stand-still conditions (no air conditioning nor domestic
hot water demand). The final decision to allow power interruption of the outdoor
unit during standstill depends on the ambient temperature, compressor conditions
and minimum internal timers.
To enable the power saving function setting, [E‑08] needs to be enabled on the
user interface.
# Code
[9.F] [E‑08]
Protective functions
The unit is equipped with the following protective function:
▪ Tank disinfection [2-01]
# Code
[9.G] N/A
Description
Averaging time:
▪ 0: No averaging
▪ 1: 12 hours
▪ 2: 24 hours
▪ 3: 48 hours
▪ 4: 72 hours
Description
Auto restart:
▪ 0: Manual
▪ 1: Automatic
Description
Power saving function for outdoor unit:
▪ 0: No
▪ 1: Yes
Description
Disable protections:
▪ 0: No
▪ 1: Yes
EKHWET90~120BAV3
R32 Split series – Domestic hot water tank
4P680077-1 – 2021.11