Using And Programming Schedules - Daikin R32 Split Series Installer's Reference Manual

10.4.2 Using and programming schedules

EKHWET90~120BAV3
R32 Split series – Domestic hot water tank
4P680077-1 – 2021.11
About schedules
Depending on your system layout and installer configuration, schedules for
multiple controls may be available.
You can...
Set if a specific control needs to act according
to a schedule.
Select which schedule you currently want to use for a specific control. The system
contains some predefined schedules. You can:
Consult which schedule is currently
selected.
Program your own schedules if the
predefined schedules are not satisfactory.
The actions you can program are control
specific.
Possible schedules
The table contains the following information:
▪ Schedule/Control: This column shows you where you can consult the currently
selected schedule for the specific control. If needed, you can:
- Program your own schedule. See
▪ Predefined schedules: (if applicable) The predefined schedule in the system for
the specific control. If needed, you can program your own schedule.
▪ Activation screen: For most controls, a schedule is only effective if it activated in
its corresponding activation screen. This entry shows you where to activate it.
▪ Possible actions: Actions you can use when programming a schedule.
Schedule/Control
[5.5] Tank > Schedule
Schedule for the domestic hot
water tank temperature for
your normal domestic hot
water needs.
"Activation screen" in
schedules" [
"Schedule/Control" in
schedules" [
▪ "Possible actions" in
schedules" [
▪ "10.4.3
Example" [
"10.4.3 Schedule screen:
Description
Predefined schedules: Not applicable
Activation screen: Not applicable. This schedule
is automatically activated if the DHW mode is
one of the following:
▪ Schedule only
▪ Schedule + reheat
Possible actions:
▪ Comfort: When to start heating the tank to
the user-defined preset value [5.2] Comfort
setpoint.
▪ Eco: When to start heating the tank to the
user-defined preset
setpoint.
▪ Stop: When to stop heating the tank, even if
the desired tank temperature is not reached
yet.
Note: In Schedule + reheat mode, the
system also takes the user-defined preset value
[5.4] Reheat setpoint into account.
10 Configuration
|
See...
"Possible
4
61]
"Possible
4
61]
"Possible
4
61]
Schedule screen:
4
62]
4
Example" [ 62].
value [5.3] Eco
Installer reference guide
61