Installer Settings - Daikin R32 Split Series Installer's Reference Manual

10 | Configuration

10.6.5 Installer settings

Installer reference guide
82
Reset
Reset the configuration settings stored in the MMI (user interface of the indoor
unit).
Example: Holiday settings.
INFORMATION
This does not reset the configuration settings and field settings of the indoor unit.
#
[8.A]
Possible read-out information
In menu...
[8.2] Malfunction history
[8.3] Dealer information
[8.4] Sensors
[8.5] Actuators
[8.6] Operation modes
[8.7] About
[8.8] Connection status
[8.9] Running hours
Overview
The following items are listed in the submenu:
9
User settings
Information

Installer settings

Commissioning
User profile
Code
N/A
Malfunction history
Contact/helpdesk number
Outdoor temperature, Tank
temperature.
Status/mode of each actuator
Booster heater
Current operation mode
Example: Defrost/oil return mode
Version information about the system
Information about the connection
status of the unit, the room thermostat
and WLAN.
Running hours of specific system
components
[9] Installer settings
[9.1] Configuration wizard
[9.4] Booster heater
[9.5] Emergency
[9.9] Power consumption control
[9.E] Auto restart
[9.F] Power saving function
[9.G] Disable protections
[9.I] Overview field settings
[9.N] Export MMI settings
Description
Reset the MMI EEPROM
to factory default
You can read out...
EKHWET90~120BAV3
R32 Split series – Domestic hot water tank
4P680077-1 – 2021.11