AMD XILINX T2 Telco Installation Manual page 9

9. Return to the System BIOS screen and click the Back button again.
10. In the System BIOS Settings main menu screen, click Finish.
11. A popup window will show a warning, as shown below. Click Yes to save the changes you
made.
12. Click the Finish button again.
13. When the system has rebooted, check to see if the T2 card has been detected using the
lspci | grep Xilinx command.
UG1527 (v1.0) June 15, 2022
T2 Telco Accelerator Card Installation Guide
Chapter 1: Introduction
www.xilinx.com
Send Feedback
9