Dependencies/Known Issues
This section lists the dependencies and known issues at this time.
• If a pktgen test is not properly terminated, a cold restart (that is to say, a power cycle of the
server) might be necessary.
• The boot mode does not change from QSPI mode to JTAG mode when a JTAG cable is
connected.
• PCIe
®
remove and rescan operations do not currently work for the T2 card, and might lead to
the card malfunctioning.
UG1527 (v1.0) June 15, 2022
T2 Telco Accelerator Card Installation Guide
Chapter 8: Dependencies/Known Issues
Chapter 8
www.xilinx.com
Send Feedback
26