The following files are included:
• build.sh: This script downloads all packages from the Internet and applies Xilinx patches.
• compile.sh: This script is used to compile the additional host software required to run the
design.
• test.sh: This script is used to run all the tests described in
When you have downloaded the package, select the branch for the correct DPDK version, then
run build.sh followed by compile.sh at the root directory level.
UG1527 (v1.0) June 15, 2022
T2 Telco Accelerator Card Installation Guide
Figure 3: Git Branch Structure
Chapter 5: T2 Base Software Design
Chapter 6: Running the
www.xilinx.com
Send Feedback
Tests.
17