Emerson Rosemount 708 Quick Start Manual page 28

Quick Start Guide
Standards: FM Class 3600 – 1998, FM Class 3610 – 2010, FM Class 3810
Markings:
Special Conditions for Safe Use (X):
1. The Rosemount 708 Wireless Acoustic Transmitter shall only be used
with the 701PGNKF Rosemount SmartPower battery pack.
2. Potential Electrostatic charging Hazard – See instructions.
A.7 Canada
I6 Canada Intrinsically Safe
Certificate: (CSA) 2439890
Standards: CAN/CSA C22.2 No. 0-M91, CAN/CSA C22.2 No. 94-M91, CSA
Markings:
A.8 Europe
I1 ATEX Intrinsic Safety
Certificate:
Standards:
Markings:
Special Conditions for Safe Use (X):
1. The plastic enclosure of the Rosemount 708 may constitute a
potential electrostatic ignition risk and must not be rubbed or
cleaned with a dry cloth.
2. The Model 701PGNKF Power Module may be replaced in a hazardous
area. The power module has a surface resistivity greater than 1 GΩ
and must be properly installed in the wireless device enclosure. Care
must be taken during transportation to and from the point of
installation to prevent electrostatic charge build-up.
28
– 2005, NEMA 250 – 2003, ANSI/IEC 60529 – 2004
IS CL I, DIV 1, GP A, B, C, D T4; CL 1, Zone 0 AEx ia IIC T4; T4(–
40 °C ≤ T ≤ +70 °C) when installed per Rosemount drawing
a
00708-1000; Type 4X
Std C22.2 No. 142-M1987, CSA Std C22.2 No. 157-92, CSA
Std C22.2 No. 60529:05
I.S. CL I, DIV 1, GP A, B, C, D when installed per Rosemount
drawing 00708-1001; T3C; Type 4X
Baseefa11ATEX0174X
EN 60079-0: 2012, EN 60079-11: 2012
II 1 G Ex ia IIC T4 Ga, T4 (–40 °C ≤ T
June 2022
≤ +70 °C)
a
Emerson.com/Rosemount