Emerson Rosemount 708 Quick Start Manual page 19

Hide thumbs Also See for Rosemount 708:

June 2022

5.2.1

Configure the device using AMS Device Manager

AMS Device Manager is capable of connecting to devices directly, using a

HART modem, or remotely using the Gateway.

Procedure

•

To configure the Rosemount 708 Transmitter, double click (or right click

and select Configure/Setup) on the device icon that will appear below

either the HART modem or Gateway connection tree.

5.3

Device network configuration

To communicate with the Gateway (and ultimately the host system), the

transmitter must be configured to communicate with the wireless network.

Using a Field Communicator or AMS Device Manager, enter the network ID

and join key so they match the network ID and join key of the Gateway and

other devices in the network. If they do not match, the acoustic transmitter

will not communicate with the network. The network ID and join key may be

obtained from the Gateway on the Systems Settings>Network>Network

Settings page on the web server, shown in

Figure 5-1: Gateway Network Settings

5.3.1

Configure the network using AMS Device Manager

Procedure

1. Right click on the acoustic transmitter and select Configure.

2. When the menu opens, select Join Device to Network and follow the

method to enter the network ID and join key.

Quick Start Guide

Figure

5-1.

Quick Start Guide

Table of Contents