Download Print this page

Hogtunes WILD BOAR AUDIO WBARG KIT 2R Installation Manual page 9

Hide thumbs Also See for WILD BOAR AUDIO WBARG KIT 2R:

Advertisement

F ina l i n st a l l at ion Not e s
1)
Many users will store music on a hand held type player and use that as the
music source for the bikes audio. PLEASE NOTE: If you "borrow" music
files from certain sites, they typically sound VERY POOR. Using a good
quality file will only make the system sound as good as it can!
2)
Many users will take advantage of the convenience of "streaming" their music
to the radio using Bluetooth®. It should be noted that it was found that
plugging in the music device using the radios USB cord sounds better and
plays louder than using Bluetooth®.
3)
Assuming you have the correct flash and the 3 position switch on the side of
the amp is set to "A", we suggest having the bass on the radio set to 1 or 2
bars above the center position, and the treble set to one or 2 bars below the
center position. If you have bass heavy music, and are hearing some "break
up" there is nothing wrong with lowering the bass control on the radio till
everything sounds "right". You can set the bikes AVC (Automatic Volume
Control) however you like it, although we found "3 bars" works best.
Before re-installing outer fairing, turn front wheel
to each extreme side making sure any wiring is
not impeding the steering of the motorcycle.
Failure to do so can result in serious
Re-install the fairing and the system is now ready to enjoy!
injury or death!
8

Advertisement

loading