Advertisement
Step #4: Removing the Factory Speakers:
With the grills off the bike remove the 4 screws that secure the factory
speaker to bike. Gently pull up each factory speaker so it's coming
away from the bike and carefully remove the speaker wires. Put the
factory speakers aside.
Step #5: Installing the Wild Boar Audio WBC 1654 RG Speaker:
Take a Wild Boar Audio woofer and attach the factory speaker wires
noting they will only go on one way. The #1 reason for tech relat-
ed calls is loose wires at the speaker which is why we designed the
self-locking clips on the speaker frame. You will need to "maneuver"
the new woofer into place so it will go past the grill opening on the
inner fairing, noting it will go in without force. In order to make the
speaker install properly, the speaker wires must be oriented so they
are closest to the top of the inner fairing (12 o'clock position). When
installed correctly, the 2 small wires that go from the back of the speaker
and "through" the speakers ring will also be in the 12 o'clock position.
Reinstall the factory screws to secure the woofers in place making
sure the speaker is flush to the mounting plane of the factory speaker
cabinet.
Step #6: Installing the Wild Boar Audio Speaker Grills:
Before proceeding, please MAKE SURE all 6 metal mesh tabs on the
speaker grills have been folded over to properly secure the grill mesh
to the trim ring! There is a small 2 wire plug for the tweeter on each
grill that will get plugged into the mating connector on the wire coming
through front of the speakers ring. When these are plugged together,
there will be an extra length of wire. In the kit there are foam strips that
are "peel and stick". You can use the peel and stick foam that came
with the kit to secure the extra length of wire on top of the factory
speaker cabinet. The goal is to make sure this extra length of wire does
not fall in front of the woofer and rattle against the woofer as it's
playing. With the extra wire out of the way, the new grill will press into
the inner fairing and "click" into its final position.
3
Advertisement
