Advertisement
Thank you for choosing the Hogtunes Wild Boar Audio WBARG Kit.2R for
2015+ Rushmore Platform Road Glides. Since positive word of mouth is the
best way to grow our business, we want your new system to work as well as it
was designed to. If you have any questions or concerns, we are here to help.
The WBA 400.2R amplifier is a Class D design. It should be
understood that ALL Class D amplifiers, REGARDLESS OF BRAND, cause
a reduction in FM reception. The WBA 400.2R features a proprietary
circuit design called R.E.M.I.T. (Reduced Electro Magnetic Interference
Technology) that Hogtunes believes gives the BEST FM reception
available for any Class D Amplifier designed for a motorcycle.
If you add a 2nd or 3rd model amplifier to your system, reduction
of FM reception is increased and is considered normal.
Hogtunes understands that some riders prefer the cosmetics
of in-fairing antennas, however it should be noted that
NOTHING WORKS AS WELL AS THE FACTORY ANTENNA
If FM is an important part of your riding experience, we strongly
advise against the use of any in fairing type antenna!
For Road Glide and Road Glide Special models, this system requires a radio
re-flash by a dealer to work properly. This is explained in Section 3 of the
manual. Please DO NOT ignore this important step, or the system will not
work as well as it has been designed to. With the correct radio flash, the
system can play at high levels with virtually no audible distortion.
The installation will be done in 3 steps.
STEP 1: CHANGING OUT THE FRONT SPEAKERS
STEP 2: INSTALLATION OF THE AMPLIFIER
STEP 3: ROUTING THE POWER HARNESS
Wild Boar Audio Contact Information
IMPORTANT
Email: techsupport@hogtunes.com
Tel: 705-719-6361
1
.
Advertisement
