Hogtunes REV 200-AA Installation Manual

200 watt 2-channel amplifier for use on 1998-2013 model bikes

Advertisement

 
Dennis Kirk provides instructions to help our customers better understand how to install the
products we sell. The instructions are exact copies of what the manufacturer includes with the
product being sold.
That means the quality and accuracy of the instructions is solely dependent on what the
manufacturer produces. We do our best to make the text legible and the pictures viewable.
However, the end result depends largely on the quality of instructions the manufacturer
provides.
Therefore, you will find that some instructions are not of the highest quality. Sometimes text is
hard to read and pictures are not easy to see. At times you will find the overall look of the
instructions to be less than professional. However, we feel it is better to provide what we have
rather than provide nothing at all.
To the best of our knowledge the instructions and application information contained in the
instructions is accurate. However, Dennis Kirk assumes no liability related to any errors that
may be contained in the copy of the manufacturer's instructions we provide. Buyers are solely
responsible to insure that product use is consistent with their application.
If you have any questions please contact us at
800-969-7501 so we can further assist you regarding additional product information or any other
business related questions.
Thank you for doing business with Dennis Kirk.
 
Instruction Disclaimer 
 
 
customerservice@denniskirk.com
or

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the REV 200-AA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Hogtunes REV 200-AA

  • Page 1       Instruction Disclaimer    Dennis Kirk provides instructions to help our customers better understand how to install the products we sell. The instructions are exact copies of what the manufacturer includes with the product being sold. That means the quality and accuracy of the instructions is solely dependent on what the manufacturer produces.
  • Page 2 REV 200-AA REV 200-AA 2 0 0 W a t t 2 - C h a n n e l A m p l i f i e r 2 0 0 W a t t 2 - C h a n n e l A m p l i f i e r...
  • Page 3 If you have any questions or concerns, we are here to help. The REV 200-AA Amplifier is a Class D design. We chose this design because it yields plenty of power, is easy on the bike’s charging system and produces little heat.
  • Page 4: Mounting Considerations

    2) If you already have a REV 200-AA in the bike, it should be mounted to a plate attached to the main studs that hold the inner fairing to the frame of your bike.
  • Page 5: Getting Started

    4 pin connector on the amp. Make sure to plug this into the black plug and NOT the blue plug on the 8 pin input connector. NOTE: If using this amplifier to power Hogtunes 692.2/Lids 6x9”speaker lid kit, FL-7W 7” Fairing lower woofer kit or...
  • Page 6: Wiring The Amplifier

    Step #1c: Follow this step if this is the second amp in the bike and the first amp is also a Hogtunes REV 200-AA or a NCA 70.2. Locate the blue plug with red/black and white/black wires on it and plug this into the expansion port (also a blue plug) located on the input harness of the “First”...
  • Page 7 Step #2: Earlier in the install, you located the black 4 pin plug with the blue/black and brown/black wires on it and plugged it into the “amplified output” on the amp. The blue/black wires will plug directly to the speaker on the brake side of the bike. The brown/black wires will plug directly to the speaker on the clutch side of the bike.
  • Page 8: System Upgrade

    This system is an easy way to add rear speakers to your bike if you’ve added a King Tour-Pak®. Hogtunes rear speaker pods come with a wire harness set up for quick detach tour paks that will plug right into the expansion port on the amp.
  • Page 9 SYSTEM UPGRADE #2 This system has the incredible power of 2 REV 200-AA Amplifiers to your bike! The first amp will run the 5.25” fairing speakers and HF-1 Tweeter Pod (if present). The second amplifier is used to power a set of 692.2/Lids, FL-7W Fairing lower woofers or rear Tour pak speakers.
  • Page 10 692.2/lids or lower speakers. You can literally build the system the way you want based on the body work you have on your bike. This can be done at any time, all bolt in, all plug and play! Hogtunes 2CHSP mounting plate is required to bolt the REV 200-AA into your fairing.
  • Page 11 AVC position works and sounds best. Your new amplifier has been specifically set-up for this radio setting. 2) Your Hogtunes system is designed specifically for a motorcycle at speed. Exhaust noise and wind noise have been taken into careful consideration in how your system performs.
  • Page 12: Technical Specifications

    Harley-Davidson, Electra Glide, Road Glide, Street Glide, Ultra Classic, Tri Glide, CVO, Screamin Eagle and Tour-Pak® are Trademarks, and/or Registered Trademarks of Harley-Davidson, Inc., Milwaukee, Wisconsin, USA, and if Used or Implied are for Reference Only. There is No Affiliation Between Harley-Davidson, Inc., and Hogtunes Inc.
  • Page 13 Hogtunes products will play much louder than the Original Equipment, which can be a distraction to the rider and/or passenger. Please use caution when adjusting or playing your stereo at high volume, especially in traffic. You are a valued customer so please:...

Table of Contents