Setting And Monitoring The Printer; Settings In Parameter Menu - Novexx Solutions ALX 73 Series User Manual

S
TARTUP AND OPERATION
Setting and monitoring the
printer

Settings in parameter menu


The settings described below are generally includ-
ed in the print job, in which case they do not need to be
made. Manual settings that were made before a print
job was transferred will be overwritten by the settings in
the print job.

For further details on setting options in the parame-
ter menu, see section Printer parameter menu 
page 56.
Label pitch
 Switch to offline mode.
To measure label pitch automatically:
Press the Feed + Prog keys.

The printer moves the label material forward until the
two label starting marks have moved through the label
sensor. The label pitch determined in this way is dis-
played and transferred to parameter
TERS > Material length. Parameter
Material type
is set to "Punched".
Display of the measured label pitch:
OFFLINE X JOBS
xxx.x mm
To enter the label pitch manually:
1. Measure label pitch [47C].
PRINT PARAMETERS > Material length
2. Navigate to
enter the measured value in millimetres.
Material width
1. Measure the width of the material ribbon [47D] (in-
cluding backing paper).
2. Enter the measured value in millimetres.
User manual ALX 73x | file version 00 | 04/2013
on
PRINT PARAME-
PRINT PARAMETERS >
and
A
C
[47] Label material (self-adhesive labels)
A Label belt (backing paper)
B Label
C Label pitch
D Material width

Setting and monitoring the printer | 27

ALX
73x
GB
B
D