Changing Ribbon - Novexx Solutions ALX 73 Series User Manual

S
TARTUP AND OPERATION

Changing ribbon

With roll diameter monitoring
We recommend switching on roll diameter monitoring,
see section Ribbon reserve 
As soon as the critical diameter is reached, the mes-
sage appears:
FOIL X JOBS
Follow these steps:
1. Open the front cover.
The printer prints the current label completely and
then stops.
Print status:
Cover open
As soon as the buffer loop is empty, the dispenser
also stops.
2. Changing a ribbon roll.
3. Close the front cover.
The status message is confirmed automatically.
4. Press the feed key.
The current print job continues.
Without roll diameter monitoring
As soon as the ribbon roll is used up, the following mes-
sage appears:
Print status: 5008
Foil end
The printer stops immediately, without printing the cur-
rent label.
1. Open the front cover.
Print status:
Cover open
As soon as the buffer loop is empty, the dispenser
also stops.
2. Changing a ribbon roll.
3. Close the front cover.
The status message is confirmed automatically.
4. Press the Enter key to confirm the ribbon end mes-
sage.
User manual ALX 73x | file version 00 | 04/2013
on page 29.
5103
5103
ALX
73x
GB
Inserting/replacing ribbon | 13