S
TARTUP AND OPERATION
Inserting label material
WARNING!
Danger of injury due to moving and rapidly
rotating parts!
Before inserting the label roll ensure that
the printer and dispenser are both in offline
mode.
Danger of injury caused by falling label roll.
Wear safety shoes.
Inserting the label roll
1. If necessary, adjust the diameter of the unwinding
mandrel to the core diameter of the material roll;
see section
Adjusting the core diameter of the
unwinder
on page 15.
2. Push the material roll [6A] onto the dispenser until
it stops.
3. Turn the knob [6B] clockwise until the label roll is
firmly seated.
For the remainder of the material flow, see sec-
tion
Threading in the label web
4 | Inserting label material
A
on page 5.
[6] Inserting a material roll
B
User manual ALX 73x | file version 05 | 04/2013
ALX
73x