Troubleshooting And Errors During Operation - AGFA DX-G User Manual

76 | DX-G, DX-M | Advanced Operation

Troubleshooting and Errors during Operation

The troubleshooting for a malfunction of the digitizer consists of three parts:
• The first is always to check the status indicator on the digitizer: during
errors it will continuously lighting up in red or flashing red.
• The second is checking why the digitizer does not start-up.
• Finally you can check the connection to the NX workstation.
Topics:
• Status Indicator: continuously red
• Status Indicator: flashing red
• Digitizer does not Start up
2321G EN 20181126 1428