Re-Routing Of An Image - AGFA DX-G User Manual

68 | DX-G, DX-M | Advanced Operation

Re-routing of an Image

Normally, an image is sent to the workstation where it was identified. But in
case of transmission problems, the image can be rerouted on the digitizer and
sent to an alternative workstation.
To reroute an image
1. In the Standby window, click the Configuration button.
The Rerouting window appears.
2321G EN 20181126 1428
WARNING:
The demographic data selected during original
identification are lost. On the new workstation, the
demographic data have to be filled in manually.