AGFA DX-G User Manual page 48

48 | DX-G, DX-M | Introduction
2321G EN 20181126 1428
Using unapproved spare parts
WARNING:
To avoid images being lost due to a power failure, the
workstation and the digitizer have to be connected to an
uninterruptable power supply (UPS) or an institutional standby
generator.
WARNING:
System unavailability due to hardware or software failure. If the
product is used in critical clinical workflows, a backup system
has to be foreseen.
WARNING:
The user must be aware that any error (crash / lock up) leading
to an image processing failure can cause loss of diagnostic
information.
WARNING:
If there is any visible damage to the machine casing, do not start
nor use the digitizer.
WARNING:
Do not override or disconnect the integrated safety features.
WARNING:
Switch off the digitizer before performing any maintenance
work or repairs. Disconnect the digitizer from the mains before
making repairs or performing any maintenance activities during
which live electrical components may be exposed.
CAUTION:
Switch the system off before moving it. When reaching the new
position, fix the digitizer in place and switch the system on
again.
CAUTION:
Strictly observe all warnings, cautions, notes and safety
markings within this document and on the product.
CAUTION:
All Agfa medical products must be used by trained and qualified
personnel.
CAUTION:
Make sure that the digitizer is constantly monitored in order to
avoid inappropriate handling, especially by children.