Cleaning - AGFA DX-D 600 User Manual

46 | DX-D 600 | Introduction to the DX-D 600

Cleaning

To clean the exterior of the equipment:
1. Stop the system
2. Wipe the exterior of the system with a cloth slightly moistened with a
neutral detergent. Some approved disinfectants can be used for cleaning
as well.
3. Start up the system.
0240H EN 20181119 0940
WARNING:
When the equipment is going to be cleaned, be sure to turn
OFF the power of each device, and to unplug the power cord
from the AC outlet. Never use anhydrous or high solvency
alcohols, benzine, thinner or any other flammable cleaning
agent. Otherwise, it may result in fire or electric shock.
CAUTION:
Make sure no liquid gets in the device.
CAUTION:
Clean the equipment with only a little moisture. Do not
spray disinfectants or detergents directly on the equipment.
Do not pour liquid directly on the equipment.
CAUTION:
Do not use solvents such as anhydrous or high solvency
alcohols, thinner or benzine. Do not use any corrosive,
dissolving or abrasive cleaning or polishing detergents.
Doing so may damage the surface of the equipment. Using
unsuitable cleaning agents or methods can damage the
property when surface becomes dull and brittle (e.g. by
using alcohol-containing agents).
Note: Do not open the equipment for cleaning. No
components inside the device require cleaning by the user.