AGFA DX-D 600 User Manual page 97

Table 3: Guidance and manufacturer's declaration on electromagnetic
immunity
Immunity IEC 60601-1-2
Test
Electrostatic ± 8 kV contact
discharge
± 2 kV, ± 4 kV,
(ESD)
± 8 kV, ± 15 kV
IEC 61000-4-2 air
Electrical fast ± 2 kV for power
transient/ supply lines
burst
± 1 kV for input/
IEC 61000-4-4 output lines
(100 kHz repeti-
tion frequency)
Surge ± 0.5 kV, ± 1 kV
line(s) to line(s)
IEC 61000-4-5
± 0.5 kV, ± 1 kV,
± 2 kV line(s) to
earth
Voltage dips, 0% U
short inter- cle at 0°, 45°,
ruptions and 90°, 135°, 180°,
voltage varia- 225°, 270° and
tions on pow- 315°
er supply in-
0% U
put lines.
at 0°
IEC
70% U
61000-4-11
25/30 cycles at
0°
0% 250/300 cy-
cles
DX-D 600 | Remarks for HF-emission and immunity | 97
Compliance
Test Level
± 8 kV contact
± 2 kV, ± 4 kV,
± 8 kV, ± 15 kV
air
± 2 kV for power
supply lines
± 1 kV for input/
output lines
(100 kHz repeti-
tion frequency)
± 0.5 kV, ± 1 kV
line(s) to line(s)
± 0.5 kV, ± 1 kV,
± 2 kV line(s) to
earth
for 0.5 cy- 0% U
T
cle at 0°, 45°,
90°, 135°, 180°,
225°, 270° and
315°
for 1 cycle 0% U
T
at 0°
for 70% U
T
25/30 cycles at
0°
0% 250/300 cy-
cles
Electromagnetic en-
Level vironment - guid-
Floors should consist
of wood, concrete or
ceramic tiles. The rel-
ative humidity must
be at least 30%, if the
floor is made of syn-
thetic material.
The quality of the
voltage supplied
should correspond to
a typical commercial
or clinical environ-
ment.
The quality of the
voltage supplied
should correspond to
that of a typical com-
mercial or clinical en-
vironment.
for 0.5 cy- The quality of the
T
voltage supply should
correspond to that of
a typical commercial
or clinical environ-
ment. If the user
for 1 cycle
T
wants the device to
work continuously,
for
even when the energy
T
supply is interrupted,
it is recommended to
use an energy supply
free of interruptions
or a battery.
0240H EN 20181119 0940
ance