Emergency Shutdown Power Switch - AGFA DX-D 600 User Manual

Emergency shutdown power switch

Use the emergency shutdown power switch, if a dangerous situation cannot be
eliminated by pressing the emergency stop button.
The emergency shutdown power switch for the room is typically located on
the wall and easy to access, often close to the power off switch of the X-ray
system. It is installed and labeled by customer.
WARNING:
Use the emergency shutdown power switch in case of danger to
patients, operators, third parties, or one of the units. The entire
system will be shut down and the power supply will be
disconnected.
WARNING:
It must be ensured that the emergency switches are always
freely accessible.
DX-D 600 | Introduction to the DX-D 600 | 57
0240H EN 20181119 0940