Table of Contents
Advertisement
32
GETTING TO KNOW YOUR VEHICLE
Outside Mirrors Folding Feature
All outside mirrors are hinged and may be folded
forward or rearward to avoid damage. The hinges
have three detent positions:
Full forward position
Full rearward position
Normal position
P
M
— I
E
OWER
IRRORS
F
QUIPPED
The power mirror controls are located on the
driver's side door trim panel.
Power Mirror Controls
To adjust a mirror, turn the control knob toward the
left upper, left lower, right upper or right lower
mirror positions indicated by one of the four arrows
on the switch. Tilt the control knob in the direction
you want the mirror to move. When you are
finished adjusting the mirror, turn the control to the
center O (off) position to prevent accidentally
moving a mirror.
NOTE:
If your vehicle is equipped with additional
spotter mirrors, you can adjust them when the
control knob is positioned to the lower arrows.
The vehicle must be in ON/RUN to adjust the
mirrors.
P
F
O
OWER
OLDING
UTSIDE
I
E
F
QUIPPED
The power folding mirrors can be folded rearward
and unfolded into the normal driving position.
The switch for the power folding mirrors is located
on the driver's door panel below the power mirror
controls. Push the switch to the right and the
mirrors will fold in, push the switch to the left and
the mirrors will return to the normal driving
position.
1 — Power Folding Mirror (Normal Driving Position)
2 — Power Folding Mirror (Fold In Position)
M
—
IRRORS
The power folding mirrors are designed to be
folded and unfolded using the power folding
switch. If the mirrors are manually folded, the
mirror head may appear loose.
If the mirror head or pivot exhibits a slight amount
of play, the mirror should be power folded closed,
then power folded open (this may require multiple
button pushes).
NOTE:
The intended use of the power folding mirrors is by
pushing the buttons to fold and unfold the mirrors.
Only manually fold the mirrors when necessary.
Power Folding Mirror Switch
Advertisement
Table of Contents
