Table of Contents
Advertisement
Replacing Interior Bulbs
CARGO LAMP
See the following steps to replace:
1. Using a suitable tool, remove either the lamp
above the back door or the sliding door lamp
as needed and disconnect it.
Rear Cargo Lamp Bulb Access
2. Using a suitable tool, pull open the metal bulb
access on the back of the housing.
Cargo Lamp Bulb Location
3. Remove and install the replacement bulb.
4. Close the bulb access, connect the lamp and
install the lamp into place.
SERVICING AND MAINTENANCE
DOME LAMPS
See the following steps to replace:
1. Using a suitable tool, insert the tip at the
location shown and press inward to the lamp
to relieve the spring tension. This will allow
you to easily drop the dome lamp assembly
from its bracket and disconnect the lamp.
Dome Lamp Assembly Location
1 — Spring Tension Relief Access
2 — Dome Lamp Assembly
237
8
Advertisement
Table of Contents
